I was reading some of my entries that I wrote into one of my many journals during my flying career and I came upon an interesting flight that I had experienced and thought perhaps there were at least a few people that may be interested in drama, so I decided that I would share it. Most of you may not understand the technological aspects of what I have written, but you will get the idea.
On a flight from San Diego to Denver, which is a hub for United, I was Captain and had the controls on a B-757 with 288 passengers and crew. Counting all passengers, crew, baggage and fuel, we were at MTOW (Maximum Take Off Weight). Most of the passengers were going to Denver to make a connection to another airport, so we did have a responsibility to get them to their destination on time. Connections sometimes are as little as 20 minutes between landing and takeoffs. In some cases, it is up to the Captain of a flight that is waiting on passengers, if he wants to wait a few extra minutes for his passengers to arrive from their previous location before taking off. You have to understand that Airports and ATC's (Air Traffic Controllers) in particular do not like to have their schedule disrupted, if the plane is ready to roll, but decides to wait. This type of situation can really mess up an airport's schedule. Daily, each plane is given a window of time to takeoff. If they miss it, they have to wait until all of the other planes that are still in their window of time period to be served first. If you, as a Captain decide to wait, you can really mess up that plane's schedule for that particular day.
Anyway, as we were nearing Denver, we went through a pre arrival checklist. Everything went well and so we advised the ATC in charge of our arrival in Denver that we were preparing to land and that we would be using their ILS (Instrument Landing System) to guide us to the runway and that we were requesting Runway 16R, which is my favorite because it's the longest runway here in the U.S. By using the ILS, it actually sets the airplane right down on the center line of the runway. In most cases, if the flight has gone well, the pilots have turned on the AP (Auto Pilot) as soon as they have taken off and then have not touched the controls again until just before touchdown at their arrival airport. Just after my F/O (First Officer) advised the ATC with that information, I requested that the F/O lower the landing gear. Unfortunately, nothing happened. For a moment or two, time kind of stood still and it's like, "What just happened or should I say didn't happen?"
I told the F/O to try it again. Still nothing. I then told the F/O that we were going to get out the manual and do a troubleshoot of the system. The third item that was listed for us to check was the circuit breakers. We took out the old circuit breaker and put in a new one and just like magic, it was fixed. What a great feeling and again, I thanked Mr. Boeing.
Hope that you enjoyed the story.
On a flight from San Diego to Denver, which is a hub for United, I was Captain and had the controls on a B-757 with 288 passengers and crew. Counting all passengers, crew, baggage and fuel, we were at MTOW (Maximum Take Off Weight). Most of the passengers were going to Denver to make a connection to another airport, so we did have a responsibility to get them to their destination on time. Connections sometimes are as little as 20 minutes between landing and takeoffs. In some cases, it is up to the Captain of a flight that is waiting on passengers, if he wants to wait a few extra minutes for his passengers to arrive from their previous location before taking off. You have to understand that Airports and ATC's (Air Traffic Controllers) in particular do not like to have their schedule disrupted, if the plane is ready to roll, but decides to wait. This type of situation can really mess up an airport's schedule. Daily, each plane is given a window of time to takeoff. If they miss it, they have to wait until all of the other planes that are still in their window of time period to be served first. If you, as a Captain decide to wait, you can really mess up that plane's schedule for that particular day.
Anyway, as we were nearing Denver, we went through a pre arrival checklist. Everything went well and so we advised the ATC in charge of our arrival in Denver that we were preparing to land and that we would be using their ILS (Instrument Landing System) to guide us to the runway and that we were requesting Runway 16R, which is my favorite because it's the longest runway here in the U.S. By using the ILS, it actually sets the airplane right down on the center line of the runway. In most cases, if the flight has gone well, the pilots have turned on the AP (Auto Pilot) as soon as they have taken off and then have not touched the controls again until just before touchdown at their arrival airport. Just after my F/O (First Officer) advised the ATC with that information, I requested that the F/O lower the landing gear. Unfortunately, nothing happened. For a moment or two, time kind of stood still and it's like, "What just happened or should I say didn't happen?"
I told the F/O to try it again. Still nothing. I then told the F/O that we were going to get out the manual and do a troubleshoot of the system. The third item that was listed for us to check was the circuit breakers. We took out the old circuit breaker and put in a new one and just like magic, it was fixed. What a great feeling and again, I thanked Mr. Boeing.
Hope that you enjoyed the story.